Filter
Top Products
WARNING!
IN ORDER FOR THE UNIT TO FUNCTION PROPERLY AND SAFELY THE DEBRIS
SHIELD MUST BE ATTACHED TO THE GEAR BOX IN THE CORRECT POSITION.
THE SHIELD CAN BE ATTACHED IN A HIGH POSITION OR A LOW POSITION.
WHEN USING THE BLADE
THE SHIELD MUST BE IN THE HIGH POSITION.
WHEN USED AS A LINE
TRIMMER THE SHIELD MUST BE IN THE LOW POSITION.
SHIELD ASSEMBLY FOR LINE TRIMMER (LOW POSITION)
THE BRACKET (FIG. 1) MUST BE MOUNTED TO THE SHIELD WITH THE OPEN SIDE UP AS SHOWN. SECURE
THE BRACKET AND SHIELD TO THE GEAR BOX WITH THE 4 SCREWS INCLUDED. TIGHTEN THE SCREWS
FIRMLY WITH A 4mm ALLEN WRENCH.
SHIELD ASSEMBLY FOR BRUSH CUTTER BLADE (HIGH POSITION)
THE BRA
CKET (FIG.
2) MUST BE MOUNTED
T
O THE SHIELD WITH THE OPEN SIDE DOWN AS SHOWN. SECURE
THE BRACKET AND SHIELD TO THE GEAR BOX WITH THE 4 SCREWS INCLUDED. THE TOP OF THE BRACKET
MUST BE EVEN WITH THE TOP OF THE SHIELD.TIGHTEN THE SCREWS FIRMLY WITH A 4mm 4MM ALLEN
WRENCH.
4
SHIELD ASSEMBLY INSTRUCTIONS
Fig. 1
Fig. 2