Filter
Top Products
2
• The handles and shield must be mounted according to the instructions. Do not attach any
blade to a unit without proper installation of all required parts. Failure to use the proper
parts can cause the blade to fly off and seriously injure the operator and/or bystanders.
Discard blades that are bent, warped, cracked, broken or damaged in any way. Use a sharp
blade. A dull blade is more likely to snag and thrust.
• The cutting attachment may be spinning during carburetor adjustments. Wear your
protective equipment and observe all safety instructions. Be sure the cutting attachment
stops turning when the engine idles. When the unit is turned off make sure the cutting
attachment has stopped before the unit is set down. A coasting blade can cause injury
while it continues to spin after the engine is stopped when throttle trigger is released.
Maintain proper control until the blade has completely stopped rotating.
SAFETY RULES
WARNING: IT IS UNSAFE TO USE ANY AFTER MARKET HEAD, ATTACHMENT, ACCESSORY
OR BLADE ON THIS UNIT. USE ONLY HEADS, ATTACHMENTS, BLADES AND ACCESSORIES
MANUFACTURED BY SARLO AND INTENDED FOR THIS SPECIFIC MODEL.