Filter
Top Products
6 7
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Engine Size..................................................................................................................................................................25.4 cc
Engine Output ..............................................................................................................................................................1.2 HP
Sand Tank Capacity .....................................................................................................................................................13 lbs.
KNOW YOUR CULTIVATOR
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ENGINE SWITCH
The engine switch controls the ignition system. The switch
must be in the ON ( I ) position for the engine to start and run.
To stop, place the switch in the OFF ( O ) position.
JUST ADD SAND
™
Putting sand in the sand tank allows greater stability when
operating the cultivator, and also gives added weight to the ma-
chine, allowing it to cultivate with less effort and vibration.
RECOIL STARTER
The recoil starter is used for starting the engine.
PRIMER BULB
The primer bulb pumps fuel from the fuel tank to the
carburetor. This is necessary only when starting a cold en-
gine or after refueling an engine that has run out of fuel.
START LEVER
The start lever opens and closes the choke valve in the
carburetor. The START position enriches the fuel mixture
for starting a cold engine. The RUN position provides the
correct fuel mixture for normal operation after starting, or
for restarting a warm engine.
THROTTLE LEVER
The throttle lever controls the rotation speed of the tines.
Completely engage the throttle lever while cultivating.
ENGINE
SWITCH
THROTTLE
LEVER
FUEL TANK
INNER TINES
JUST ADD SAND
™
PRIMER
BULB
START
LEVER
RECOIL
STARTER
OUTER
TINE
OUTER
TINE
DRAG BAR
WHEEL
ASSEMBLY
ACCESSORY
HITCH
PIN
TINE
SHIELD