Filter
Top Products
8
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type or a characteristic of current
Direct Current Type or a characteristic of current
n
0
No Load Speed Rotational speed, at no load
Class II Construction Designates Double Insulated Construction
tools
.../min Revolutions or Reciprocation Per Minute Revolutions, strokes, surface speed, orbits
etc. per minute
Safety Alert Symbol Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Wet Conditions Alert Do not expose to rain or use in damp
locations.
Read Your Operator’s Manual Your manual contains special messages to
bring attention to potential safety concerns,
machine damage as well as helpful operating
and servicing information. Please read all the
information carefully to avoid injury and ma-
chine damage.
Wear Eye, Hearing, and Head Protection Wear eye protection which is marked to com-
ply with ANSI Z87.1 as well as hearing and
head protection when operating this equip-
ment.
Wear Safety Footwear Wear non-slip safety footwear when using this
equipment.
Wear Gloves Wear non-slip, heavy-duty protective gloves
when handling the pruner.
Keep Children and Pets Away Danger- Keep children and pets away.
Beware of Kickback DANGER! Beware of kickback.
SYMBOLS