Filter
Top Products
13
ASSEMBLY
Fig. 12
CLEANING
DECK
HIGH PRESSURE
WATER SUPPLY HOSE
DECK INLET
PLUG
QUICK CONNECT
COUPLER
INSTALLING CLEANING DECK
See Figures 12 - 14.
To install the cleaning deck on the pressure washer:
Connect the lower end of the high pressure water supply
hose to the cleaning deck by inserting the deck inlet plug
into the quick connect coupler on the water supply hose.
Push ends together until coupler snaps into position.
Slide cleaning deck and pressure washer housing to-
gether until the connection is secure.
Insert upper end of high pressure water supply hose into
trigger handle outlet coupler and push ends together until
coupler snaps into position.
To install the cleaning deck on the spray wand:
Assemble the trigger handle and spray wand as described
previously in this manual.
Insert cleaning deck inlet plug into the spray wand quick
connect coupler and push ends together until coupler
snaps into position.
WARNING:
To reduce the risk of injection or injury, only use the
cleaning deck on flat, horizontal surfaces. Never lift the
cleaning deck from the cleaning surface while operating
the pressure washer.
Fig. 13
Fig. 14
DECK INLET
PLUG
QUICK CONNECT
COUPLER
TRIGGER HANDLE
OUTLET COUPLER
HIGH PRESSURE
WATER SUPPLY
HOSE