Filter
Top Products
English
– 9
SAFETY INSTRUCTIONS
• Never run with the machine when it is running. You should
always walk with the lawn mower.
Cutting height
Shut down the engine before changing the cutting height.
The cutting height adjustment is spring assisted. The cutting
height can be adjusted in five different steps.
Do not set the cutting height too low as there is a risk that the
cutters might hit slopes with unevenness.
Adjusting the cutting height
Shut down the engine before changing the cutting height.
Set the cutting height using the cutting height control on the
right-hand side of the lawn mower.
On lawn mowers with the type designation M48 Pro, proceed
as follows:
• To raise the cutting height move the lever to the left and
then forward.
• To lower the cutting height move the lever to the left and
then backward.
On lawn mowers with the type designation M53 S Pro,
proceed as follows:
• To lower the cutting height move the lever to the left and
then forward.
• To raise the cutting height move the lever to the left and
then backward.
Do not set the cutting height too low as there is a risk that the
cutters might hit slopes with unevenness.