Filter
Top Products
English
– 5
SAFETY INSTRUCTIONS
Vibration damping system
Your machine is equipped with a vibration damping system
that is designed to minimize vibration and make operation
easier.
The handlebar system's steel tube and the cutting cover are
designed to minimise the vibrations from the engine.
This model also has a vibration damper fitted on the
handlebar unit to further reduce vibrations.
The machine
′
s vibration damping system reduces the transfer
of vibration between the engine unit/cutting equipment and
the machine
′
s handle unit.
Muffler
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
In areas with a hot, dry climate there is a high risk of fires.
These areas are sometimes controlled by legislation and
requirements that among other things the muffler must be
equipped with an approved type of spark arrestor mesh.
For mufflers it is very important that you follow the instructions
on checking, maintaining and servicing your machine.
Checking, maintaining and servicing
the machine
′′
′′
s safety equipment
Checking the cutting cover and protective
cover
Make sure the cutting cover is not damaged and that there are
no visible defects such as cracks.
Check that the protective cover is undamaged and that it is
properly secured.
Checking the brake trigger
Place the lawn mower on firm, flat surface and start it. Make
sure that the cutter cannot come into contact with the ground
or other objects. See the instructions under the heading Start
and stop.
Apply full throttle and then release the brake handle.
The engine brake should always be adjusted so that the
engine stops within 3 seconds.
On lawn mower M53 S Pro the engine brake handle should
also disengage the drive. Start the machine and engage the
drive by moving the clutch lever towards you.
Apply full throttle and then release the brake handle. The
engine should stop and the drive should disengage.
!
WARNING! Overexposure to vibration can
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
These symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or
condition. These symptoms normally appear
in the fingers, hands or wrists.
!
WARNING! The exhaust fumes from the
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!
!
WARNING! The muffler gets very hot in use
and remains so for a short time afterwards.
Do not touch the muffler if it is hot!
!
WARNING! All servicing and repair work on
the machine requires special training. This is
especially true of the machine
′′
′′
s safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of our
products we guarantee the availability of
professional repairs and service. If the
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.