Filter
Top Products
7
RULES FOR SAFE OPERATION
• THROWN OBJECTS AND ROTATING CUTTER CAN
CAUSE SEVERE INJURY
WARNING: Do not operate without the cutting attachment
shield in place. Keep away from the rotating cutting
attachment.
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF OR STOP
• HOT SURFACE WARNING
Do not touch a hot muffler or cylinder. You may get burned.
These parts get extremely hot from operation. When turned
off they remain hot for a short time.
• SHARP BLADE
WARNING: There is a sharp blade on the cutting attachment
shield. To prevent serious injury, do not touch blade.
• CHOKE CONTROL
A • FULL CHOKE position.
B • PARTIAL CHOKE position.
C • RUN position.
• INDICATES OIL
Refer to operator's manual for the proper type of oil.
• DO NOT USE BLADES
WARNING: To prevent serious injury, do not attach or operate
the unit with any type of blade.
WARNING: The operation of any power tool can cause foreign objects to be
thrown into your eyes. This can lead to severe eye damage. Before commencing
power tool operation, always wear safety glasses or goggles that are marked as
meeting ANSI Z87.1-1989 standards, and a full face shield when needed.
MEANING
SYMBOL