Filter
Top Products
RULES FOR SAFE OPERATION
4
• Clear the area to be cut before each use.
Remove all such objects such as rocks,
broken glass, nails, wire, or string which can
be thrown or become entangled in the
cutting attachment. Clear the area of
children, bystanders, and pets. At a
minimum, keep all children, bystanders and
pets outside a 50 ft. (15m.) radius; there still
may be a risk to bystanders from thrown
objects. Bystanders should be encouraged
to wear eye protection. If you are
approached, stop the engine and cutting
attachment immediately.
• Squeeze the throttle control and check that it
returns automatically to the neutral position.
Make all adjustments or repairs before using
unit.
• This unit was not designed to be used as a
brushcutter. Do not attach or operate this
unit with any type of brushcutting blade or
brushcutting attachment.
SAFETY WARNINGS FOR GAS
TRIMMERS
WARNING: Gasoline is highly flammable, and its
vapors can explode if ignited. Take the following
precautions:
• Store fuel only in containers specifically
designed and approved for the storage of
such materials.
READ ALL INSTRUCTIONS
BEFORE OPERATING
• Read the instructions carefully. Be familiar
with the controls and proper use of the unit.
• Do not operate this unit when tired, ill, or
under the influence of alcohol, drugs, or
medication.
• Children and teens under the age of 15 must
not use the unit, except for teens guided by
an adult.
• Inspect the unit before use. Replace
damaged parts. Check for fuel leaks. Make
sure all fasteners are in place and secure.
Replace cutting attachment parts that are
cracked, chipped, or damaged in any way.
Make sure the cutting attachment is properly
installed and securely fastened. Be sure the
cutting attachment shield is properly
attached, and positioned as recommended.
Failure to so can result in personal injury to
the operator and bystanders, as well as
damage to the unit.
• Use only 0.080 in (2.03 mm) diameter
genuine Ryobi replacement line. Never use
metal-reinforced line, wire, or rope, etc..
These can break off and become a
dangerous projectile.
• Be aware of the risk of injury to the head,
hands and feet.
• IMPORTANT SAFETY INFORMATION •
DANGER: Failure to obey a safety
warning will result in serious injury
to yourself or to others.
Always
follow the safety precautions to
reduce the risk of fire, electric
shock, and personal injury.
WARNING: Failure to obey a safety
warning can result in injury to
yourself and others.
Always follow
the safety precautions to reduce the
risk of fire, electric shock, and
personal injury.
CAUTION: Failure to obey a safety
warning may result in property
damage or personal injury to
yourself or to others.
Always follow
the safety precautions to reduce the
risk of fire, electric shock, and
personal injury.
The purpose of safety symbols is to attract your
attention to possible dangers. The safety
symbols, and their explanations, deserve your
careful attention and understanding. The safety
warnings do not by themselves eliminate any
danger. The instructions or warnings they give
are not substitutes for proper accident
prevention measures.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates danger, warning, or
caution. Attention is required in
order to avoid serious personal
injury. May be used in conjunction
with other symbols or pictographs.
NOTE: Advises you of information or
instructions vital to the operation or
maintenance of the equipment.