Filter
Top Products
Lubricate roof snaps on left side of the front Gable (M) 4 places.
Raise the Left Roof Panel (N) onto the left side of the shed assembly, the arrows
on the Roof Panel should face the inside of the shed and point towards the Ridge
Beam Assembly.
R
M
N
31
32
Using (2) stepstools (1 inside shed, 1 outside shed), lift the bottom of the Roof Panel above horizontal and guide into the Ridge Beam Assembly. Align the front Gable (M) rib with the channel in
the Left Roof Panel (N). Engage Left Roof Panel (N) in the Ridge Beam Assembly by lowering the bottom of the Roof Panel onto the shed assembly (hold Ridge Beam Assembly to prevent
twisting). DO NOT SNAP ROOF DOWN.
R
1
3
R
N
R
2
3
M
2
N
M
3
Channel
Roof Panel
Rib
Gable