Filter
Top Products
OPERATION
DB150 07/11 Operation Section 4-10
© 2011 Alamo Group Inc.
OPERATION
6.1 Setting Boom Mower Height
1. Park the tractor and boom mower on level
ground.
2. Shut down the tractor and remove the key.
3. Level the boom mower from front to rear by
extending or retracting the 3-point top link.
4. Level the mower side to side by manipulating
one lower lift arm length. On most tractors, at
least one of the lift arms is designed to allow for
manipulation of its length. Shortening or
extending will allow for deck leveling from side
to side.
5. Securely block up the mower at this height.
NOTE: Install optional check chains when there is a
problem with the hydraulic 3-Point lift maintaining a
set height or when a constant pre-adjusted cut
height is required. See Check Chains in the
Assembly Section for this accessory.