Filter
Top Products
36
Wireless Monitor
The generator is supplied with a battery-powered, wireless monitor.
The monitor communicates wirelessly with the generator control panel. The monitor may be placed in a suitable location in the
home. The system has a line-of-sight range of about 200 feet, but this distance will decrease if the signal has to pass through
walls or other objects.
The wireless monitor communicates with the generator, every 10 minutes and will display the status via LED lights on the front
of the monitor.
Compare the illustration below with your monitor to familiarize yourself with these important components.
t (FOFSBUPS3FBEZA) - Green LED
t (FOFSBUPS1PXFSB) - Green LED
t 4FSWJDF/FFEFEC) - Red LED
t 4ZTUFN6QEBUFD) - Press for current system update with generator.
t 4FSWJDFDPEFEFTDSJQUJPOTE) - Name and number of flashes are listed on the backside of the wireless monitor.
t #BUUFSZ"DDFTT$PWFSF) - Record the dealer name and phone number on the label provided. Once opened, two AA
batteries are installed in the compartment (G).
DEALER
NAME
DEALER
PHONE
generator power
service needed
generator ready
system update
GENERATOR
POWER
SERVICE
NEEDED
GENERATOR
READY
SYSTEM
UPDATE
1 low battery voltage
2 low fluid level
3 under/over voltage
4 engine does not start
part #: 316197 fcc id: MCQ-XBS2C IC id: 1846A-XBS2C
5 low frequency
6 engine overspeed
7 high temperature
8 transfer switch
# of flashes service needed
B
A
C
D
E
G
F