Filter
Top Products
26
REPLACING THE AIR FILTER
To replace the air filter:
1. Remove the air filter cover at the back of the
S8 ELITE.
2. Remove and discard the old air filter.
3. Insert a new filter with the blue tinted side facing out from the device.
4. Replace the air filter cover.
Inspect the air filter every month to check if it is blocked by dirt or contains holes. With
normal use of an
S8 ELITE, the air filter needs to be replaced every six months (or more
often if your device is in a dusty environment).
!
WARNING
• Do not wash the air filter. The air filter is not washable or reusable.
• The air filter cover protects the device in the event of accidental liquid spillage
onto the device. Ensure the air filter and air filter cover are fitted at all times.
SERVICING
!
CAUTION
• Do not attempt to open the S8 Elite case. There are no user serviceable parts
inside.
• Inspection and repair should only be performed by an authorised agent. Under
no circumstances should you attempt to service or repair the flow generator
yourself.
This product (
S8 ELITE) should be inspected by an authorised ResMed service centre
5 years from the date of manufacture. Prior to this, the device is intended to provide
safe and reliable operation provided that it is operated and maintained in accordance
with the instructions provided by ResMed. Applicable ResMed warranty details are
provided with the device at the time of original supply. Of course, as with all electrical
devices, if any irregularity becomes apparent, you should exercise caution and have the
device inspected by an authorised ResMed service centre.
If you feel that your flow generator is not performing properly, see “Troubleshooting”
on page 29.
Air filter cover