ResMed S8 Elite System Portable Generator User Manual


 
16
HOW TO CHANGE THE SETTINGS
You can change settings on the S8 ELITE by using the keypad and LCD. When the
S8 ELITE is in standby mode you can display a series of screens (a menu) on the LCD
screen in order to view and change the settings for a particular function.
Your clinician will preset the menu to either a standard view or a detailed view.
See “How to Use the Standard Menu” on page 17 and “How to Use the Detailed
Menu” on page 19 for more information.
HOW TO ENTER THE MENU SCREENS
When the S8 ELITE standby (RAMP) screen is displayed you will see the word ‘menu’
in the left-hand corner. To select an
S8 ELITE menu, press the Left key.
HOW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
HOW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
HOW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the standby (RAMP) screen.
HOW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
HOW TO CHANGE THE RAMP TIME
During ramp time, the pressure increases from a low pressure to the prescribed
treatment pressure. You can set the ramp time in 5-minute intervals, from 0 minutes
(OFF) up to a maximum ramp time set by your clinician.
The standby screen displays the current ramp time in the right-hand corner. To change
the ramp time, press the Up or Down key until the desired ramp time appears.
Once a ramp time is selected, begin therapy by pressing the Start/Stop key.