Filter
Top Products
20
SETTINGS MENU
Select Enter (Left key) on the Settings menu to access the options in this menu.
HOW TO CHANGE THE EXPIRATORY PRESSURE RELIEF SETTING
Note: EPR may not be available in all regions.
Your clinician may have set up your device to deliver expiratory pressure relief (EPR).
This can be used to help ease any discomfort you may experience when breathing out
during treatment. There are four settings: 1(lowest EPR), 2, 3 (highest EPR) and OFF
(no EPR).
If you have access and want to change the EPR setting, scroll to EPR SETTING and
select Change (Left key). Press the Up or Down keys until you see the setting that
you require.
HOW TO SELECT THE MASK TYPE
Scroll to MASK and select Change (Left key). Press the Up or Down keys until you
see the mask type that you require.
The following table shows the setting that should be selected for each mask type.
HOW TO CHANGE THE TUBE LENGTH
Scroll to TUBE LENGTH and select Change (Left key). Press the Up or Down keys
until you see the tube length that you require.
HOW TO ADD A HUMIDIFIER OR FRONT CAP
Scroll to HUMID and select Change (Left key). Press the Up or Down keys until you
see the setting that you require. You can use the device with or without a front cap.
Table 3: Settings for mask types
Settings Mask
ULTRA Ultra Mirage Nasal Mask
MIR FULL Mirage Full Face Mask
Mirage Full Face Mask Series 2
Ultra Mirage Full Face Mask
ACTIVA Mirage Activa Nasal Mask
SWIFT Mirage Swift Nasal Pillows System
MIRAGE Mirage Nasal Mask
STANDARD Mirage Vista Nasal Mask
Modular Nasal Mask
Papillon