Filter
Top Products
10 |
Chapter 4: Blower/Vac Operation
120133
Figure 4-13: Removing vacuum tube adapter
Figure 4-14: Removing debris from impellers
Figure 4-10: Removing bag/adapter assembly
Emptying the Vacuum Bag
1. Turn vacuum off and unplug power
cord.
2. Lift and release draw latch on vacuum
bag adapter and remove from blower/
vac housing (see Figure 4-10).
3. Unzip vacuum bag and shake out
contents (see Figure 4-11).
4. Zip the vacuum bag closed and
reassemble vacuum bag adapter to
blower/vac housing. Note: Be sure to
securely connect the draw latch to the
vacuum bag adapter.
Figure 4-11: Unzipping and emptying bag
Removing Clogged Debris
from the Impeller
1. Turn vacuum off and unplug power
cord.
2. Press locking lever on vacuum tube
adapter and remove tube adapter as-
sembly from blower/vac (see Figures
4-12 and 4-13).
3. Check the impeller for clogged debris
and any signs of damage. Carefully
remove debris from impellers (see
Figure 4-14).
4. Replace vacuum tube adapter assem-
bly.
Figure 4-12: Pressing locking lever