Filter
Top Products
22
Programming
1. Turn off the Weatheradio.
2. Hold down
WEATHER
and turn
VOLUME
clock-
wise to turn on the Weatheradio.
7(6702'(
7(6702'(7(6702'(
7(6702'(
appears.
3. Press the number keys (
1–7
) to verify the pro-
grammed NOAA weather frequencies.
4. Press
;
;;
;
to test the Weatheradio’s alert beep.
%((3#21
%((3#21%((3#21
%((3#21
appears. Press
8
again to stop the alert.
%((3#2))
%((3#2))%((3#2))
%((3#2))
appears
Important:
The next step erases any FIPS
codes or weather channels you programmed.
5. To erase the Weatheradio’s memory and restore
the factory settings, press
9
.
6. Press
WEATHER
to see all the display elements.
7. To exit Test Mode, turn off the Weatheradio.
USING THE WEATHERADIO’S ‘ALL
SIGNALS’ CODE
This Weatheradio is preset to the
$//#/2&
$//#/2&$//#/2&
$//#/2&
(all signals)
mode (see Page 16), which lets it receive all SAME
broadcasts within a 50-mile radius.