Filter
Top Products
22
AUTOMATICALLY
STORING FREQUENCIES
You can have your scanner automati-
cally store active frequencies into
empty channels within the banks you
specify.
1. Press
PROGRAM
then
LIMIT
.
Lo
and the lower limit frequency
appears.
2. Enter the lower limit using the
number keys or use the rotary
tuner to enter the lower limit of the
frequency range you want to
search, then press
E
.
Note:
If you enter an invalid fre-
quency in Step 2 or 4, the scanner
displays
Error
. Simply repeat
the step.
3. Press
LIMIT
.
Hi
appears.
4. Enter the upper limit using the
number keys or use the rotary
tuner to enter the upper limit of the
frequency range you want to
search, then press
E
;.
5. Press
AUTO
.
AUTO
appears and
the numbers 1–10 flash on the
display.
6. Using the number keys, enter the
numbers of the banks where you
want to store frequencies. The
selected banks’ indicators appear
steadily in the display. All other
banks’ indicators flash.
Notes:
• To select bank 10, press
0
.
• If you select a bank that does
not contain an empty channel,
the scanner beeps and
FULL
appears.
• To deselect the bank, press the
bank number again.
7. Press
s
to search from the lower
to the upper limit, or
t
to search
from the upper to lower limit. The
current bank’s indicator starts
blinking. The current channel also
appears.
When the scanner finds a trans-
mission, it checks to see if the fre-
quency is stored in any other
channel. If not, the scanner stores
the frequency, then continues
searching for more transmissions.
8. To stop storing frequencies, press
MANUAL
.
When all channels fill, the scanner
beeps twice and
End
appears. Press
MANUAL
to display the channel where
the last frequency was stored.
20-418.fm Page 22 Wednesday, August 4, 1999 12:42 PM