Filter
Top Products
1 882E Quick Start Guide - HDCP Compliance Testing with Encryption Status Tester (EST) - P/N 68-00210 Rev. B
Running the HDCP compliance test for HDMI devices
Overview
The 882E-Analyzer (882EA) supports the running of an HDCP compliance test on
HDCP-enabled HDMI sources, sinks and repeaters. The HDCP compliance test was
developed while working closely with Digital Content Protection.
The HDCP compliance test system enables developers of HDMI products to perform a fast
and comprehensive HDCP compliance test. Because the 882 can emulate HDMI HDCP
sources, sinks and repeaters, it can perform a complete HDCP compliance tests on any
HDCP capable HDMI source, sink or repeater.
The HDCP compliance test can be run entirely through the 882 front panel or through the
command line. The HDCP commands enable you to run a specific subset of the tests in
the series of tests.
When the tests are completed, an HTML report is issued and saved in the Reports
directory of the external memory card (if the card is inserted in the 882E). The report has
a summary and detail section. A Pass or Fail indication is provided for each test. In some
cases the test report shows “Not Judged.” The Not Judged result is regarded as a failure
for compliance testing at an ATC.
Note: This document may be updated frequently. If you are using this document in printed
form please be sure that you check the Quantum Data website for updates at:
www.quantumdata.com/downloads/index.asp.