Filter
Top Products
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
UNIT
Unit Weight........................... 68 lb. (31 kg)
Cutting Swath....................... 22 in. (599 mm)
Cutting Line Diameter................ 0.155 in. (4 mm)
Wheel Diameter ..................... 14 in. (356 mm)
CuttingHeight.................. 1.5-3.0 in. (38-76 mm)
Gasoline Type ......Regular
Unleaded – 88 Octane (min.)
Gasoline Capacity ....................
0.95 qt. (0.9 L)
Oil Type (API SG-SL) ..............................
10W-30 is recommended for all service temperatures. See
page 7 for additional information.
Oil Capacity ..........................
17 oz. (503 ml)
Spark Plug Model...................... Torch F6RTC
Spark Plug Gap ...........0.028-0.031 in. (0.7-0.8 mm)
ENGINE
Type ............................... 4Stroke,OHV
Displacement ...............................160 cc
Torque Rating ....................................
6.25 ft/lbs gross torque per SAE J1940
Bore Diam. x Stroke........ 2.52 x 1.97 in. (64 x 50 mm)
Intake Valve Clearance . .0.0031-0.0047 in. (0.08-0.12 mm)
Exhaust Valve Clearance .0.0051-0.0067 in. (0.13-0.17mm)
Angle of Ignition ........................18 Degrees
Full Throttle RPM ............................3000
Idle Speed RPM .............................2200
Specifications
• Save all instructions
1. Trimmer Head Drive Lever Engages the rotation of
the trimmer head.
2. Start Lever Release to stop the rotation of the trimmer
head.
3. Throttle Control Lever Controls the engine speed and
stops the engine.
4. Recoil Starter Handle The engine is equipped with an
easy pull recoil starter.
5. Recoil Starter Cover Covers recoil starter mechanism.
Holesallowairintaketocoolingsystem.
6. Spark Plug/Spark Plug Wire Provides spark to ignite
air/fuel mixture. The spark plug wire must be moved
away from the spark plug when servicing the unit.
7. Muffler Location of engine exhaust
8. Trimmer Guard Protects the operator from thrown
debris. Blade mounted on guard will automatically cut
trimmer line to correct length if line is too long.
9. Trimmer Line Rotating cutting element of trimmer.
10. Trimmer Head Rotates the trimmer lines. Sets the
height of the cut.
11. Primer Button Injects fuel directly into the carburetor
for faster starts.
12. Air Filter Removes debris and contaminates from
intake air, allowing engine to run smoothly with low
exhaust.
Features
3
1
11
12
9
8
7
6
2
4
Figure 1
10
5
5