Filter
Top Products
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
SLOPE GUIDE
SIGHTANDHOLDTHISGUIDELEVELWITHAVERTICALTREE,A
CORNER OF A STRUCTURE, A POWER LINE POLE, OR A FENCE.
Operate a trimmer across the face of slopes, never up or down slopes.
Use this guide and do not trim on a slope greater than 15 degrees.
A 10-degree slope is a hill that increases in height at approximately 1.7 feet in
10 feet.
A 15-degree slope is a hill that increases in height at approximately 2.5 feet in
10 feet.
WARNING!
Use extreme care at all times and avoid sudden turns or maneuvers.
Follow other instructions in this manual for safety in trimming on slopes.
Operate a trimmer across the face of slopes, never up or down slopes. Use
extra care when operating on or near slopes and obstructions.
19
F-050204L
15 Degrees
10 Degrees
Operate a trimmer across the face of
slopes, never up or down slopes.
FOLD ALONG DOTTED LINE
15 DEGREES
12