Filter
Top Products
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
7
Safety Decals (Continued)
• Save all instructions
Assembly
• Save all instructions
If you need assistance or find any parts missing, CALL
TOLL FREE: 1-800-737-2112.
Read and follow the assembly instructions. Do not discard any parts or materials until the unit is assembled.
References to the right or left side of the tiller are from the viewpoint of the operator’s position behind the tiller.
WARNING
Do not operate tiller if it is damaged or not completely and correctly assembled.
WARNING
Before doing any assembly or maintenance to the unit, remove the wire from the spark plug.
WARNING
Always wear ANSI compliant safety glasses with side shields while assembling the tiller.
The following components will be found in the carton.
Quantities shown in ( ).
1. (1) Tiller
4. (2) Tine Assembly
5. (1) Tine Guard Assembly
6. (1) Depth Regulator
7. (2) M10x50mm bolts and lock nuts for assembling
stationary side shields
8. (1) Tiller Operator’s Manual
9. (1) Engine Manual
10. (1) Bottle of SAE 30 Engine Oil
11. (1) Parts bag containing the following
a. (1) Spark plug wrench
b. (2) Combination wrenches
assembling front carry handle
nuts for assembling lower handle
e. (4) M8x60mm saddle bolts and washers for
assembling upper handle
g. (2) Wheel locking pins
nuts
i. (2) M10x50mm bolts and lock nuts for assembling tines
j. (1) Detent pin
k. (4) M8 wing nuts for assembling rotating side shields.