Filter
Top Products
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
Adjustments
I
DEPTH REGULATOR LEVER (See Figure 2)
Tilling depth is controlled by the height of the
depth regulator lever. To adjust tilling depth:
1. Remove pin and cotter key.
2. Raise the depth regulator lever to position tines at chosen
tilling depth.
3. Align hole in depth regulator lever with hole in depth
regulator bracket and replace pin and cotter key.
Depth Regulator Lever Down = Shallower tilling.
Place the pin in the top hole of the depth regulator lever for
shallowest tilling.
Depth Regulator Lever Up = Deeper tilling.
Place the pin in the bottom hole of the depth regulator lever for
deepest tilling.
WARNING
ADJUSTING ANY CONTROLS.
WARNING
RELEASED AND ENGINE IS TURNED OFF.
13
Clutch Lever
H
CLUTCH LEVER (See Figure 13)
Engages tines into forward. Pushing down the clutch lever
toward the handlebar engages the tines. Releasing the lever
stops the tines and brings the tiller to a complete stop.
Operation (Continued)
• Save all instructions
CAUTION
-
TIME. STARTING AND OPERATING INSTRUCTIONS ARE GIVEN
-
ING AND SAFETY INSTRUCTIONS BEFORE STARTING YOUR
TILLER.
WARNING
POSITION.
LEVERS.
Forward Lever
Engaged
Figure 13