Filter
Top Products
Questions? Call Toll Free at 1-800-737-2112 Copyright © 2009 MAT Engine Technologies, LLC
11
Operation
• Save all instructions
Pre-Start Inspection
A
1. Make sure all safety guards are in place and all nuts and
bolts are secure.
2. Check oil level in engine crankcase. See your engine
3. Inspect air cleaner for cleanliness. See your engine
manual for procedure.
4. Check the fuel supply. Fill the fuel tank no closer than 1
inch from top of tank to provide space for expansion. See
your engine manual for fuel recommendations.
5. Be sure spark plug wire is attached and spark plug is
tightened securely.
6. Check position of wheels and wheel lockouts.
7. Check depth regulator lever position.
8. Examine underneath and around engine for signs of oil or
fuel leaks.
9. Inspect fuel hoses for tightness and fuel seepage.
10. Look for signs of engine damage.
starter.
IMPORTANT:
OIL. YOU MUST ADD ENGINE OIL BEFORE STARTING
ENGINE.
CAUTION
-
-
ENGINE.
WARNING
OR RUNNING. ALWAYS MOVE OUTDOORS TO FILL TANK.
-
CLEAR GROUND.
DANGER
-
Start the Engine
B
2. Grasp starter handle and pull out slowly, until it pulls slightly harder. (Figure 9)
3. Pull rope with a rapid full arm stroke until engine runs.
4. After engine starts running, move choke lever to the appropriate position
Figure 8 Figure 9