Filter
Top Products
4
EDGER SAFETY
WARNING: Inspect the area to be
edged before each use. Remove objects
(rocks, broken glass, nails, wire, etc.) which
can be thrown by the blade or can wrap
around the shaft.
S Blade rotates momentarily after the trigger
is released. The blade can seriously cut
you or others.
S Allow blade to stop before removing it from
the cut.
S Throw away blades that are bent, warped,
cracked, broken or damaged in any other
way. Replace parts that are cracked,
chipped, or damaged before using the unit.
S Do not attempt to remove cut material nor
hold material to be cut when the engine is
running or when cutting blade is moving.
S Always keep the wheel and depth adjusting
skid in contact with the ground.
S Always push the unit slowly over the
ground. Stay alert for uneven sidewalks,
holes in the terrain, large roots, etc.
S Always use the handlebar when using
edger attachment.
BLOWER/VACUUM SAFETY
WARNING: Inspect area before
starting unit. Remove all debris and hard ob-
jects such as rocks,glass, wire, etc. that can
ricochet, bethrown, orotherwise causeinjury
or damage during operation.
S Do no tset un it o nany surface except aclean,
hard area while engine is running. Debris
such as gravel, sand, dust, grass, etc., could
be picked up by the air intake and thrown out
through discharge opening, damaging unit,
property , or causing serious injury to
bystanders or operator .
S Never place objects inside the blower tubes,
vacuum tubes or blower outlet. Always direct
the b lowing debris away from people,
animals, g lass, and solid objects such as
trees, automobiles, walls, etc. The force ofair
cancauserocks,di rt ,orsticks t obe thro wno r
to ricochet which can hurt people or animals,
break g lass, or cause other damage.
S Never run unit without the proper
equipment attached. When using your unit
as a blower, always install blower tubes.
S Check air intake opening, blower tubes or
vacuum tubes frequently , always with
engine stopped and spark plug
disconnected. Keep vents and discharge
tubes free o f debris which can accumulate
and restrict proper air flow.
S Never p lace any object in air intake opening
as this could restrict proper air flow andcause
damage to the unit.
S Never u se for spreading chemicals,fertilizers,
or other substances which may contain toxic
materials.
S Toavoid spreading fire, donot usenear leaf or
brush f ires, fireplaces, barbecue pits,
ashtrays, etc.
BRUSHCUTTER SAFETY
DANGER: Blade can thrust violently
away from material it does not cut. Blade
thrust can cause amputation of arms or legs.
WARNING: Donot usetrimmerhead
as a fastening device for the blade.
WARNING: The b lade continues to
spin after the throttle is released or engine is
turned off. The coasting blade can throw ob-
jects or seriously cut you if accidentally
touched. Stop theblade bycontacting theleft
hand side of the coasting blade with material
already cut.
Stop coasting
blade by contact
with cut material.
WARNING: Inspect the area to be
cut before each use. Remove objects (rocks,
broken glass, nails, wire, etc.) which can be
thrown or become entangled in the blade or
trimmer line.
S Throw away and replace blades that are
bent,warped, cracked,broken ordamaged
in any other way.
S Install requiredshieldproperly beforeusing
the unit. Use the metal shield for all metal
blade use. Only use brushcutter
attachments that provide a metal shield
with proboscis nose.