Filter
Top Products
6
OPERATION
KNOW YOUR EDGER ATTACHMENT
READTHISINSTRUCTION MANUALAND SAFETY R ULES BEFOREOPERATING YOUR EDG-
ER ATTACH M ENT. Co m pare the illustratio ns wit h yo ur at tach m ent to fam iliarize yourself wit h the
location of the va rious controls and adjustments. Save this manu al for future reference.
Depth Adjustment Knob
Blade Shield
Gearbox
Wheel
Edger Blade
Shaft
Hanger
BLADE
The BLADE is designed to cut sod.
DEPTH ADJUSTMENT KNOB
The DEPTH ADJUSTMENT KNOB is used
to adjust the wheel for blade cutting depth.
OPERATING THE COUPLER
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Cultivator
PPB2000T.................
Blower
PPB3000B....................
Brushcutter
PPB4000C...............
W ARNING:
Always disconnect pow-
erheadspark plug (or disconnect powerhead
frompowersource)beforeremoving o rinstal-
ling attachments.
REMOVING ATTACHMENT
CAUTION:
When removingor installing at-
tachments, place the powerheadand attach-
ment on a flat surface for stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Coupler
Knob
LOOSEN
TIGHTEN
Upper Shaft
Lower
Attachment
2. Press andhold thelocking/release button.
Locking/Release
Button
Coupler
Upper Shaft
Lower Attachment
3. While securely holding the upper s haft,
pull the attachmentstraight outof thecou-
pler .
INSTALLING ATTACHMENT
1. Removetheshaftcapfrom theattachment
(if present) and discard.
2. Position locking/release button of attach-
ment into guiderecess ofupper shaftcou-
pler .
Coupler
Primary Hole
Upper
Shaft
Locking/
Release
Button
Attachment
Guide Recess
3. Push the attachment into the coupler until
the locking/release button snaps into the
primary hole.
4. Before using the unit, tighten theknob se-
curely by turning clockwise.