Poulan BVM200 Blower User Manual


 
-- 6 --
OPERATING POSITION
Blower
Eye
Protection
Vacuum
OPERATING TIPS
S
While vacuuming or blowing debris, hold
the unit with the muffler side facing away
from your body and clothes (see OPERAT-
ING POSITION illustration above).
S
To reduce the risk of hearing loss
associated with sound level(s), hearing
protection is required.
S
To r educe the r isk of injury associated with
contacting rotating parts, stop the engine be-
fore installing or r e m o v in g attac h ments. D o
not operate without guar d( s) in place.
S
Operate power equipment only at r easonable
hours--not early in the morning or late at night
when peoplemight be disturbed. Complywith
times listed in local ordinances. Usual recom-
mendations are 9:00 a .m. to 5:00 p.m.,
Monday though Saturday.
S
To reduce noise l evels, limit the number of
pieces of equipment used at any one time.
S
To reduce noise levels, operate power
blowers at the lowest possible throttle
speed to do the j ob.
S
Use rakes and brooms to loosen debris be-
fore blowing.
S
In dusty conditions, slightly dampen sur-
faces or use a mister attachment when wa-
ter is available.
S
Conserve water by using power blow er s
instead of hoses for many law n and garden
applications, including ar eas such as gutters,
screens, patios, gr ills, porches, and gardens.
S
Watch outfor children, pets, open windows,
or freshly washed cars. Blow debris away
safely.
S
Use the full blower nozzle extension so the
air stream can work close to the ground.
S
After using blowers and other equipment,
CLEAN UP! Dispose of debris in trash re-
ceptacles.
BEFORE STARTING ENGINE
WARNING:
Be sure to read the fuel
information in the safety rules before you be-
gin. If you do not understand the safety rules,
do not attempt to fuel your unit. Call
1-800-554-6723
.
FUELING ENGINE
WARNING:
Remove fuel cap slowly
when refueling.
This engine is certified to operate on
unleaded gasoline. Before operat ion,
gasoline must be mixed with a good quality
synthetic 2-cycle air-cooled engine oil
designed tobe mixed ata ratio of 40:1. Poulan
PRO
!
brand synthetic oi l is recommended.
Mix gasoline and oil at a ratio of 40:1. A 40:1
ratio is obtained by mixing 3.2 ounces (95 ml)
of oil with 1 gallon (4 liters) of unleaded
gasoline. DO NOT USE automotive oil or
boat oil. These oils will cause engine damage.
When mixing fuel, follow instructions printed
on container. Once oil is added to gasoline,
shake container momentarily to assure that
the fuel is thoroughly mixed. Always read and
follow the safety rules relating to fuel before
fueling your unit.
IMPORTANT
Experience indicates that alcohol blended
fuels (called gasohol or using ethanol or
methanol) can attract moisture which leads to
separation and formation of acids during
storage. Acidic gas can damage the fuel
system of an engine while in storage. To avoid
engine problems, empty the fuel system
before storage for 30days orlonger. Drainthe
gas tank, start theengine andlet itrun until the
fuel lines and carburetor are empty. Usefresh
fuel next season. Never use engine or
carburetor cleaner products in the fuel tank or
permanent damage may occur.
NOTE:
Unit must be placed on its s ide when
adding fuel (see illustration below).
TO STOP THE ENGINE
D
To stop the engine, move the throttle lever
to the STOP position.
BEFORE STARTING THE ENGINE
WARNING:
You MUST make sure
the t ubes are secure before using t he unit.
D
Fuel engine. Move at least 10 feet (3 me-
ters) away f rom the fueling site.
D
Hold the unit in the s tarting position as
shown. Make sure the blower end is di-
rected away from people, animals, glass,
and solid objects.