Poulan 952802028 Chainsaw User Manual


 
3
duty, non-slip gloves; e ye pr otection such
as non-fogging, vented goggles or face
screen; an approved s afety h ard hat; and
sound bar riers (ear plugs or mufflers) to
protect your hear ing. Regular users
should have hearing checked regularly as
chain saw noise can damage hearing. Se-
cure hair above shoulder length.
Snug
Fitting
Clothing
Safety
Shoes
Safety Chaps
Heavy Duty
Gloves
Eye
Protection
Hearing
Protection
Safety Hat
S Keep all parts ofyour body away from the
chain when the engine is running.
S Keep children, bystanders, and anim als a
minimum of 30feet (10meters) away from
the work area. Do not allow other people
or animals to be near the chain saw w hen
starting or operating the chain saw.
S Do not handle or oper ate a chain saw when
you are fatigued, ill, or upset, or if you have
taken alcohol, drugs, or medication. Y ou
must be in good physical condition and men-
tally alert. Chain saw work is strenuous. If
you have a ny c ondi tion that might b e aggra-
vated by strenuous work, check with your
doctor bef ore o perating a chain saw .
S Carefullyplanyoursawingoperation inad-
vance. Donot startcuttinguntilyouhavea
clear work area, securefooting, and, ifyou
are f elling trees, a planned retreat pat h.
OPERATE YOUR SAW SAFELY
S Donot operatea chain saw with one hand.
Serious injury to the operator, helpers, by-
standers or any combination of these per-
sons may result from one-handed opera-
tion. A chain saw is intended for
two-handed use.
S Operate t he chainsaw only in awell-venti-
lated outdoor area.
S Donot operate sawfrom aladder or in a tree.
S Make sure the chain will not make contact
with any object while starting the engine.
Never try to s tart the saw when the guide
bar is in a cut.
S Do not put p ressure on the saw atthe endof
the cut. A pplying pressure c an cause you to
lose control when the cut is completed.
S Stop the engine before setting the saw
down.
S Do not operate a chain saw that is dam-
aged, improperly adjusted, or not com-
pletely and securely assembled. Always
replace bar, chain, hand guard, or chain
brakeimmediately ifit becomesdamaged,
broken or is otherwise removed.
S With the engine stopped, hand carry the
chain saw with the muffler away fromyour
body , and the guide bar and chain to the
rear, preferably covered w ith a scabbard.
MAINTAIN YOUR SAW IN GOOD
WORKING ORDER
S Have allchain saw service performed by a
qualified service dealerwith theexception
of the items listed inthe maintenance sec-
tionofthis manual. Forexample,if improp-
er tools are used to remove or hold the fly-
wheelwhen servicingthe clutch,structural
damage to the flywheel can occur and
cause the flywheel to burst.
S Make certain the saw chain stops moving
when the throttle trigger is released. For
correction, refer to CARBURET OR AD-
JUSTMENT.
S Never modify your saw in any way.
S Keep thehandles dry ,clean, and free ofoil
or fuel mixture.
S Keep fuel and oil caps, screws, and fas-
teners securely tightened.
S Use o nly Poulan a cc essor ies an d repl ace-
ment parts as recommended.
HANDLE FUEL WITH CAUTION
S Do not smoke while handling fuel or while
operating the saw.
S Eliminate all sources o f sparks or flame in
the areas where fuel is mixed or poured.
There shouldbe nosmoking, openflames,
or workthat couldcausesparks. Allowen-
gine t o cool before refueling.
S Always have fire extinguishing tools avail-
able if you should need them.
S Mix and pour fuel in an outdoor area on
bare g round; s tore fuel in a cool, dry , well
ventilated place; and use an approved,
marked container for all fuel purposes.
Wipe up all f uel spills before s tarting saw.
S Move at least 10 feet ( 3meters) from fuel-
ing site before starting engine.
S Turn the engine off and let saw cool in a
non-combustible area, not on dry leaves,
straw, paper, etc. Slowly remove fuel cap
and r efuel unit.
S Storetheunit andfuelin anarea wherefuel
vapors c annot reach sparks or open
flames from water heaters, electric motors
or switches, f urnaces, etc.
KICKBACK
WARNING: Avoid kickback which
can r esult in serious injury. Kickback is the
backward,upwardor suddenforwardmotion
of the guide bar occurring when the saw
chain nearthe uppertip of theguide barcon-
tacts any object such as a log or branch, or
when the wood closes in and pinches the
saw chain inthecut.Contactinga foreignob-
ject in the wood can also result in loss o f
chain saw control.
S Rotational Kickback can occur when the
moving chain contacts an object a t the upper
tip of the guide bar . This contact can cause
the chain to dig into the object, which stops
the chain f or an instant. The r esult is a light-
ning fast, reverse reaction w hich kicks t he
guide bar up and back toward the operator .