Filter
Top Products
6
NOTE:
A one-halftwist is builtintheshoulder
strapto allowthestrap torestflaton theshoul-
der.
6. Adjust the strap, allowing the hook to be
about 6 inches below the waist.
7. Fasten the strap hook to the clamp and lift
the tool to the operating position.
8. Try on shoulder strap and adjust for fit
and balance before starting the engine or
beginning a cutting operation .
NOTE: It may be necessary to relocate the
shoulder strap clamp on the shaft for proper
balancing of unit.
SHOULDER STRAP
ADJUSTMENT
FOR BALANCE
6 inches
(15 cm)
below
waist
30 inches
(76 cm)
minimum
4 -- 12 inches
(10 -- 30 cm)
above
ground
30 inches
(76 cm)
minimum
OPERATION
KNOW YOUR B RUSH CUT T ER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Comp are the illustrations with your unit to familiarize yourself
with the location of various controls and adjustments. Save this manual for future reference.
Blade Shield
Blade
Gearbox
Shaft
Hanger
BLADE
The BLADE is designed for cutting grass,
weeds, and brush up to 1 /2 inch in diameter.
BLADE S HIELD
TheBLADE SHIELDprovides protectionfrom
the spinning blade.