Filter
Top Products
6
S Stoptheunitimmediately ifyou feelexcessive
vibration. Vibration is a sign of trouble. Inspect
thoroughly for loose nuts, bolts or damage
before continuing. Contact an authorized
service dealer for repair or replacement of
affected parts as necessary .
SNOW THROWER S AF ETY
WARNING: Keep hands and feet
away fr om the rotor when starting or running
the engine. Never attempt to clear the rotor
with the engine/motor running. Stop engine
and disconnect spark plug before unclogging
snow or debris from discharge chute or when
adjusting v anes.
WARNING: Never lean over dis-
charge chute. Rocks o r debris could be
thrown intothe eyes and face and cause seri-
ous injury or blindness.
WARNING: Inspect the area where
the unit is to be used. Remove objects that
could be thrown or damage the unit. Some
objects m ay be hidden by fallen snow -- be
alert for the possibility.
S Direct material discharge away from glass
enclosures, automobiles, etc.
S Do not run engine at high speed w hile not
removing snow .
S Be attentive when using the snowthrower,
and stay alert for holes in the terrain and other
hidden hazards.
S Make sure the rotor will spin freely before
attaching the snowthrower to the powerhead.
S Ifthe rotor willnot rotatefreely due tofrozen
ice, thaw the unit before thoroughly before
attempting to operate under power.
S Keep the rotor clear of debris.
S Do not throw snow near other people. The
snow thrower could propel small objects at
high speed c ausing injury.
S After striking a foreign object, stop the
engine, disconnect spark plug and ins pect
the snowthrower for damage and repair if
necessary before restarting unit.
S Never operate the snowthrower near glass
enclosures, automobiles and trucks.
S Never attempt to use the snowthrower ona
roof.
S Never operate the snowthrower near
window wells, dropoffs, etc.
S Never discharge snow onto public roads or
near moving traffic.
S Clear snow from slopes by going up and
down; never across. Use caution when
changingdirections.Neverclear snow from
steep s lopes.
S Letsnowthrower runfor afew minutes after
clearing snow so moving parts do not
freeze.
S Look behind and use care when backing up.
Exercise caution t o avoid slipping or falling,
especially when o perating in reverse.
S Know how to stop quickly .
ASSEMBLY
WARNING: If r eceived assembled,
repeat allsteps to ensure your unit isproperly
assembled and all fasteners are secure.
Examine parts for damage. Do not use dam-
aged parts.
NOTE: If you need assistance or find parts
missing or damaged, call 1-800-554-6723.
It is normal for the fuel filter to r attle in the
empty fuel tank.
Finding fuel or oil residue on m u ffler is normal
due to carburetor adjustments and testing
done by the manufacturer.
INSTALLING TRIMMER ATTACH-
MENT
CAUTION:
When installing trimmer attach-
ment, placethe uniton aflatsurface forstabil-
ity.
1. Loosen the coupler by turning the knob
counterclockwise.
Coupler
Knob
LOOSEN
TIGHTEN
Shipping
protector
2. Remove shipping protector fromcoupler.
3. Remove the shaft cap f rom the t rimmer at-
tachment (if present).
4. Position locking/release button of a ttach-
ment into guide recess of coupler.
5. Pushthe attachment intothecoupler until
the locking/release button snaps into the
primary hole.
6. Before using the unit, tighten the knob se-
curely by t urning clockwise.