Filter
Top Products
-- 6 --
5. Place the hooks of the upper vacuum tube
on the retaining posts of the unit.
6. Pivotthetubeuntil itis secured totheblower
unit by the vacuum inlet latch.
Retaining
Post
Hook
Inlet Cover
Latch
PIVOT
HOW TO CONVERT UNIT F ROM
VACUUM USE TO BLOWER USE
1. Remove the vacuum tubes by inserting the
tip of ascre wdri ver in to th elatcharea ofthe
vacuum inlet.
2. Gently tilt handle of screwdriver toward the
back of the unit to release the latch while
pulling up on the upper vacuum tube with
your other hand.
Latch Area
3. Remove the vacuum bag.
4. Closethe vacuuminlet coverand makesure
it is latched closed.
5. Reinstall the blower tube (see BLOWER
TUBE ASSEM BLY).
SHOULDER STRAP ADJUSTMENT
1. Hold the unit as shown with the muf fler side
facing away from your body and clothes.
2. Pass the shoulder strap over your head and
onto your right shoulder.
3. Extend your left arm toward the rear of the
vacu u m ba g.
4. Adjust shoulder strap until the vacuum bag/
shoulder strap seam lie s between your
thumb and index finger .
5. Make sure air flows freely from the elbow
tubeintobag. Ifbagiskinked, theunit willnot
operate properly .