Porter-Cable PCE1700 Pressure Washer User Manual


 
11 - ENG
A17914
1. Pull quick-
connect
coupler
back and
insert
nozzle.
2. Release
quick-
connect coupler and twist nozzle
to make sure it is secure in coupler.
Flying object
could cause risk
of serious injury. Ensure nozzle is
completely inserted in quick-connect
socket and quick-connect snap ring
is fully engaged (forward) before
squeezing gun trigger.
TO USE SPRAY WAND
The nozzles for the spray wand
are stored in nozzle holder on the
panel assembly. Colors on the
panel identify nozzle location and
spray pattern. See chart to choose
the correct nozzle for the job to be
performed.
CHANGING NOZZLES ON SPRAY
WAND
Risk of fluid
injection. Do not
direct discharge stream toward
persons, unprotected skin, eyes or
any pets or animals. Serious injury will
occur.
Flying objects
could cause risk
of serious injury. Do not attempt
to change nozzles while pressure
washer is running. Turn engine off
before changing nozzles.
The high pressure spray from your pressure washer is
capable of causing damage to surfaces such as wood,
glass, automobile paint, auto striping and trim, and delicate objects such
as fl owers and shrubs. Before spraying, check the item to be cleaned to
assure yourself that it is strong enough to resist damage from the force of
the spray.
*
Nozzle Color Red Yellow White Black
Spray Pattern
15º 40º low pressure
Uses
powerful
pinpoint for
very intense
cleaning
intense
cleaning of
small areas
covers wide
areas of
cleaning
applies
cleaning
solutions
Surfaces *
Metal or
concrete
DO NOT use
on wood
metal,
concrete, or
wood
metal,
concrete,
wood, or vinyl
metal,
concrete,
wood, or vinyl