Filter
Top Products
20 Software Installation
The following dialog is displayed:
• Select the destination film recorder type in
Film recorder type
.
• Enter the serial number of the target film recorder in the
Serial number
edit box.
• Windows BLL Generator will select a default name for you. You can modify the name of the
printer driver in the edit box
Driver name
.
• Select the destination directory into which the BLL files will be placed. Windows BLL Generator
will select the default temporary file path as default. You should select the network path of a
WinRascol drop box if you intend to use a film recorder that is connected to your network.
Contact your network administrator for details. You can also select the path of a ZIP-Drive, for
example.
• Press
OK
to create the BLL driver.
The BLL driver will now appear in the
BLL-generator Administration
dialog. Press
Done
to exit.
NOTE:
For technical reasons, the new BLL-generator will show
LPT1:
to be the selected output
port on Windows 95/98 until your computer is rebooted. After reboot, the new generator will
show
BLL:
. This affects appearances only, it does not impact operation of the BLL-generator in
any way.