18 Software Installation
Running setup
These steps perform the initial installation of the Windows BLL Generator package.
• Close all programs currently running.
• Insert disk 1 of the Windows BLL Generator installation disk set, skip this step if you’ve
downloaded the Windows BLL Generator from the web site.
• Press
Start
on the Windows tool bar, then select
Run
.
• If you are using installation disks enter “a:setup“ in the “run“ dialog box as follows:
• If you’ve downloaded the Windows BLL Generator or have received it from another source, use
the
Browse
button to point to it.
• Press
OK
. Setup now prepares the installation.
• Press
Next
after reading the introductory screen.
• Press
Next
after reading the readme file.
• You will be asked to select a destination directory at this time. It is strongly suggested that you
use the default directory offered by the installation program. Press
Next.
• Setup is now ready to install Windows BLL Generator. Press
Next
to install now.
• Setup will install all program files at this time. Follow setup’s instructions to insert additional
disks if needed.
• Press
Finish
to exit setup.
• Setup may ask you to reboot your computer in rare cases.
The Windows BLL Generator program files are now installed.
