Filter
Top Products
26
OPERATION
Failure to operate the vehicle properly can result in a collision, loss of control, accident or rollover,
which may result in serious injury or death. Read and understand all safety warnings outlined in the
safety section of this owner’s manual.
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 25
47
Brake fluid Ensure proper level 47
Front suspension Inspect, lubricate if necessary -
Rear suspension Inspect, lubricate if necessary -
Steering Ensure free operation 48
Tires Inspect condition and pressure 7
49
Wheels/fasteners Inspect, ensure fastener tightness 49
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Accelerator Ensure proper operation 25
Indicator lights/switches Ensure operation 20
Headlamp Check operation, apply dielectric grease when lamp is
replaced
51
Brake light/tail lamp Check operation, apply dielectric grease when lamp is
replaced
52
Latches (hood/tailgate/seat) Ensure all latches are secure -
Batteries Ensure full charges, proper water levels, clean terminals 54-56
Battery cables Inspect for proper cable routing and secure connections 55
WARNING