Filter
Top Products
Rev. A 1-18-06 3 P/N 620001
Fixture Housing Entry Hub Repair Instructions.
STEP 2
1. If there is no internal bond wire as shown, skip to STEP 3.
2. If there is an internal bond wire or a non-listed potting material around the bond post, remove the potting material
completely. A non-listed potting material would be silicone, RTV, etc.
a. Be very careful not to damage the No. 8 bond wire, the screw or the post.
3. Replace the bond wire or the bonding screw if it is damaged. Then go to instruction STEP 4 and complete the
procedures through STEP 6.
hn-02-11-16-98
Fixture 2.
Light Fixture
Cord
Internal Bond
Wire
Remove bonding
lug potting
material if
present, check
that screw is
tight.