Filter
Top Products
23
Problem Cause and Remedy
The backrest does not return to the upright
position.
The backrest will not return to the upright position if
the timer is activated or the button is pressed.
(Pressing twice will return the backrest to its
original position.)
(See Page 19)
H
Reclining does not take place even though a
massage is started in pre-programs.
(The seat does not automatically recline.)
In some cases the seat may not automatically recline
depending on the position (angle) of the backrest or
the legrest. (See Page 11)
H
The unit will not operate at all.
• The power cord has been disconnected.
(See Page 8)
• The power switch on the unit has not been turned on.
(See Page 8)
•A Pre-Program button or Manual Operation button
hasn’t been pressed after pressing .
(See Pages 11, 14)
H
The unit has been damaged.
Stop using the unit immediately.
H
The power cord or power plug is abnormally
hot.
Stop using the unit immediately.
H
It is not possible to switch from Swedish and
Knead to Hawaiian and Compression.
Switching can be hindered when the user’s body
weight is not resting on the massage heads. Shift
your weight so that your body is contact with the
massage heads.
H
The legrest will not return to its original
position.
If the length of the legrest has been extended, the
legrest will strike the floor, preventing from returning
to its original position. Try again after retracting it to
its original length.
H