Filter
Top Products
Installation procedure :
1. Slide the logger unit onto the RS232 interface.
2. Connect the socket of RS232 to the COM1 or COM2 .
3. Insert CD-ROM to the computer for starting software set up:
4. See the diagram as an example of 8818 Temp. logger :
a).Run Software. To run software from CD-Rom.(Or read manual)
b).Install Software. Run the set up installation program.
c).Brow CD-ROM. Browse the CD-Rom using Windows.
d).Web Site. Visit our web site in your browser.
e).Exit. Close this menu system.
Microsoft Office is a registered
trademark of Microsoft Corporation.
R
SOFTWARE INSTALLATION
OM8818
OM88128
OM8828
OM8829
7