Filter
Top Products
Assembly Instructions
43
Step 10
Slightly loosen Hose Clamp on
loose end of Suction Hose
Slide Suction Hose onto the bottom
fitting of the pump
Secure the Suction Hose with the
Hose Clamp
Step 11a
(1109 and 1114 models only)
Attach Idle Control Plate to Idle
Control Mount plate on the Beam
using (2) Idle Control Bolts and (2)
Idle Control nuts (already in place)
Idle Control
Plate
Idle Control
Mount Plate
Bolt
Fig 02425
Step 9b
Engine mounting pattern shown for
reference
1108 and
1109
1114
Fig 02439
Suction Hose
Hose Clamp
Fig 02424
Pump Fitting