Filter
Top Products
Optional 4-Way Wedge Wings
10
4-Way Wedge
Wings
Wing Assembly
1. Unbox and identify components
2. Insert Nylon nuts into hex cutouts in wing
3. Position wings into proper locations on the wedge and bolt into position using supplied
bolts
4. Tighten the bolts with a 3/8
”
hex wrench
•
4-Way Wings create additional pinch points when the wedge is moving forward or
backwards. Keep hands clear of the wedge, wedge wings, and the log while the wedge is
moving. When the log is caught on the wedge do not use the auto-return feature. Retract
wedge manually, paying close attention so the log does not hit the engine or control valve.
•
Pay particular attention to stringy wood, such as elm, because it becomes lodged on the
wedge easily.
To order call: Northern Tool + Equipment at 1-800-556-7885
Item Number 1143
Assembled View Ex
p
loded View