31
ENGINE:
Brand Briggs & Stratton
Model Series Snow Series
Gross Torque* 11.50 T.P. @ 3060 rpm
Type 4-Cycle - OHV
Displacement 15.26 cu in. (250 cc)
Starting System 110V Electric, Recoil
Alternator 60W AC
Oil Capacity 20 oz (,59 liter)
Hydraulic Fluid Mineral 5W30
Fuel Tank Volume 3.0 qts (2,8 liters)
Spark Plug Gap 0.030 in. (0.76 mm)
Resistor Spark Plug 481055
Long Life Platinium Spark Plug 5066
Ignition System This spark plug ignition system complies with Canadian standard ICES-002.
AUGER/IMPELLER:
Clearing Width 27 in. (68,6 cm)
Intake Height 21 in. (53 cm)
Auger/Impeller Diameter 12 in. (30 cm)
Number of Impeller Blades 3
CHUTE:
Chute Deflector Manual
Chute Rotation 190° (3.5 Turn)
DRIVE SYSTEM:
Drive Type Friction Disc - Traction Lock Pin
Drive Speeds 6 Forward Speeds, 2 Reverse
Tire Size 16 x 4.8 in. (41 x 12,2 cm)
Tire Inflation 14 psi (,96 bar)
Engine Power Rating Information
*The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive Engineers) code
J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with
SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross en-
gine power will be lower and is affected by, among other things, ambient operating conditions and engine-to-engine variability. Given
both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equip-
ment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual "on-site" or net
power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, car-
buretor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine
variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this
Series engine.
SPECIFICATIONS