Filter
Top Products
PAGE 12 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)
SAFETY INFORMATION
LIFTING SAFETY
CAUTION
NEVER allow any person or animal to stand underneath
the equipment while lifting.
DO NOT attempt to lift the saw by the guards, handle
bars or front pointers.
NOTICE
When lifting of the saw is required, use a forklift.
DO NOT lift machine to unnecessary heights.
NEVER lift the equipment while the motor is running.
ALWAYS use ramps capable of supporting the weight of
the saw and the operator to load and unload the saw.
TRANSPORTING SAFETY
NOTICE
ALWAYS shutdown saw before transporting.
ALWAYS tie down equipment during transport by
securing the equipment with rope.
Ensure that the diamond blade does not come into contact
with the ground or surface during transportation.
NEVER transport the saw to or from the job site with the
blade mounted.
ENVIRONMENTAL SAFETY
NOTICE
Dispose of hazardous waste properly.
Examples of potentially hazardous waste
are used motor oil, fuel and fuel fi lters.
DO NOT use food or plastic containers to dispose of
hazardous waste.
DO NOT
pour waste, oil or fuel directly onto the ground,
down a drain or into any water source.
DECOMISSIONING
Metal Parts Recycling
NOTICE
When the life-cycle of this equipment is over,
it is recommended that the steel frame and
all other metal parts be sent to a recycling
center.
Metal recycling involves the collection of metal from
discarded products and its transformation into raw
materials to use in manufacturing a new product.
Recyclers and manufactures alike promote the process
of recycling metal. Using a metal recycling center
promotes an energy cost savings.
Rubber Parts Recycling
NOTICE
Contact your country's Department of
Public Works or recyling agency in your
area and arrange for proper disposal of
any rubber components associated with
this equipment.