Filter
Top Products
MLT25 SERIES LIGHT TOWER • OPERATION MANUAL — REV. #0 (11/28/12) — PAGE 17
b. Locate the key slot A on each female connector
as shown in Figure 5.
Figure 5. Female and Male Connector
c. On the corresponding male connector, locate the
key tab B as shown in Figure 5.
d. Align the key tab B on the male connector with
the key slot A on the female connector and press
together until seated.
e. Secure the connector by screwing the knurled
locking nut of the male connector to the threaded
portion of the female connector to ensure good
contact between the two connectors.
FEMALE CONNECTOR
MALE CONNECTOR
KEY TAB B
KEY SLOT A
INSPECTION