Filter
Top Products
PAGE 20 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)
MAINTENANCE
REPLACING THE LAMP
REPLACING BALLOON ENVELOPE
1. Unzip the zipper (Figure 38) at the top and bottom of
the balloon envelope (cover).
Figure 23. Unzipping the Balloon Envelope
2. Slide the old or worn balloon envelope (Figure 24) over
the top of the lamp guard assembly.
Figure 24. Removing the Balloon Envelope
NOTICE
Contact Multiquip Technical Support Department for
assistance in replacing LED lamps.
BALLOON
ENVELOPE
TOP
ZIPPER
BOTTOM
ZIPPER
BALLOON
ENVELOPE
LAMP
GUARD
3. Slide the new balloon (Figure 25) envelope over the
top of the lamp guard assembly.
Figure 25. Installing New Balloon Envelope
4. Zip up the zipper (Figure 26) at the top and bottom of
the balloon envelope (cover).
Figure 26. Zipping the Balloon Envelope
BALLOON
ENVELOPE
LAMP
GUARD
BALLOON
ENVELOPE
TOP
ZIPPER
BOTTOM
ZIPPER