PAGE 38 — DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01)
Output Terminal Panel Available Voltages
A wide range of voltages are available to supply load to
many different applications. Voltages may be selected by
using the voltage change-over board and how to hookup the
hard wire connection to the voltages listed, fine adjustment
with the Voltage Regulator on the control panel is necessary.
See the table below (Table 8) for a list of available voltages
the generator is able to supply.
Over Current Relay
An over current relay is connected to the circuit breaker.
During an over current situation, both the circuit breaker and
the over current relay may trip. If the circuit breaker can not
be reset, the reset button on the over current relay must be
pressed. The over current relay is located on the control
box.
Maximum Amps
The following table below shows the maximum amps the
generator can provide Do not exceed the maximum amps
listed below.
ELBALIAVASEGATLOV.8ELBAT
LEDOMKSS005ACD
EGATLOVESAHP3
)ELBATCENNOCER(
TLOV802TLOV022TLOV042TLOV614TLOV044TLOV084
ESAHPELGNIS
)ELBATSUJDA(
TLOV021TLOV721TLOV931TLOV042TLOV452TLOV772
spmAmumixaM.9elbaT
:ledoMKSS005ACD
detaR
egatloV
spmAmumixaM
esahPelgniS
tloV021
)eriw4(spma1.1111
esahPelgniS
tloV042
)eriw4(spma6.555
esahPeerhT
tloV042
spma8.2021
esahPeerhT
tloV084
spma4.106
NEVER attempt to change the Voltage
Change-Over Board with the engine is
running.
CAUTION:
DCA-500SSK — OUTPUT TERMINAL