Multiquip DCA-400SSV Portable Generator User Manual


 
PAGE 24 — DCA-400SSV— OPERATION AND PARTS MANUAL — REV. #0 (04/19/06)
Output Terminal Familiarization
The “
Output Terminal Panel
” (Figure 8) is provided with the
following:
Three (3) 120/240V output receptacles @ 50 amp
Three (3) Circuit Breakers @ 50 amps
Two (2) 100V GFCI receptacles @ 20 amp
Two (2) GFCI Circuit Breakers @ 20 amps
Five (5) Output Terminal Lugs ( U, V, W, O, Ground)
Output Terminal Panel
The
Output Terminal Panel
(Figure 8) shown below is located
on the right-hand side (left from control panel) of the generator.
Lift up on the cover to gain access to receptacles and terminal
lugs.
NOTE
Terminal legs “O” and “Ground
are considered
bonded grounds
.
Figure 8. Output Terminal Panel
DCA-400SSV— OUTPUT TERMINAL PANEL FAMILIARIZATION