Filter
Top Products
DCA10SPX4/DCA10SPXU4 — OPERATION AND PARTS MANUAL — REV. #0 (08/05/09) — PAGE 23
1
Figure 11. Connecting Loads
Connecting Loads
Loads are connected to the generator by the
convenience
receptacles (Figure 11). Make sure to read the operation
manual before attempting to connect a load to the generator.
To protect the output terminals from overload, a
3-pole, 45A
main
circuit breaker is provided. Make sure to
switch ALL circuit breakers to the OFF position prior to
starting the engine.
DCA-10SPX4 /U4— OUTPUT TERMINAL PANEL FAMILIARIZATION