MTD E740 Snow Blower User Manual


 
4
SECTION 2: FINDING YOUR MODEL NUMBER
This Operators Manual is an important part of your new snow thrower. It will help you assemble, prepare and
maintain your snow thrower. Please read and understand what it says.
Before you start to prepare your snow thrower for its first use, please locate the model plate and copy the
information from it in this Operators Manual. The information on the model plate is very important if you need
help from your dealer or the MTD customer support department.
Every snow thrower has a model plate. You can locate it by standing behind the unit in the operating
position and looking down at the dash panel.
The model plate will look like Figure 1.
Figure 1
SECTION 3: CALLING CUSTOMER SUPPORT
If you are having difficulty assembling this product or if you have any question regarding the controls,
operation or maintenance of this snow thrower, please call the Customer Support Department. You can
reach them by calling:
1-800-800-7310
Before you call, make sure that you have both your model and serial number ready. By having the model and
serial number ready, you help the Customer Support Representative give you faster service. To find your
units model and serial number, see SECTION 2: FINDING YOUR MODEL NUMBER.
MTD PRODUCTS INC
CLEVELAND, OHIO 44136
XXX-X-XXX-X-XXX XXXXXXXXXXX
This is where your model number will be.
This is where your serial number will be.
Copy the model number here:
Copy the serial number here: