MTD 21A-120R000 Cultivator User Manual


 
8
Figure 14
SECTION 3: KNOW YOUR CULTIVATOR
Tines
Primer Bulb
Choke Control
Air Filter/
Muffler Cover
Spark
Plug
Muffler
On/Off Stop
Control
STOP/OFF (O)
START/ON (I)
Throttle
Control
Wheel Bracket
Assembly
Shaft Tube Grip
Read this operator’s manual and safety rules before
operating your cultivator. Compare illustrations in
Figure 14 with your cultivator to familiarize yourself
with the location of various controls and adjustments.
Save this manual for future reference.
Application
Use this unit for tilling sod and light to medium soil.
Also for tilling in garden areas, around trees, etc.
Throttle Control
The throttle control trigger is located below the right
handlebar grip. It controls the engine speed. See
Figure 14.
On/Off Stop Control
The On/Off Stop control switch is located on the left
side mounting bracket. It is used to turn the unit on
and off. The switch must be in the START position to
start the unit. See Figure 14.
Choke Control
The choke control is located above the air filter/muffler
cover. It is used to enrich the fuel mixture when starting
a cold engine. See Figure 14.
Primer Bulb
The primer bulb is located to the left of the air
filter/muffler cover. It is used to draw fuel into the
carburetor when starting a cold engine or after
refueling the unit. See Figure 14.
Wheel Bracket Assembly
The wheel bracket assembly is used to help move the
unit when not in use and control the tilling depth
when in use. Refer to OPERATING YOUR
CULTIVATOR in Section 4.
Tines
The tilling tines are used to cultivate, furrow, and
prepare your garden for seeding.