Filter
Top Products
ASSEMBLY INSTRUCTIONS
1. Your trap will begin capturing
immediately, but allow 4-6
weeks to interrupt the breed-
ing cycle.
2. DO NOT MOVE MOSQUITO
MAGNET WITH TANK AT-
TACHED. DISCONNECT TANK
FROM REGULATOR BEFORE
RELOCATING TRAP TO AVOID
DAMAGE TO REGULATOR OR
TRAP.
3. Should you experience an
interruption of power, be sure
to restart trap.
4. Trap can be left running in
the rain.
IMPORTANT NOTES:
2
Place base upside down on
a flat surface, slide U-
shaped support legs into
slots on base until they lock
in place.
ASSEMBLY INSTRUCTIONS
1
Turn base and leg assembly
right-side-up and place
support pole into cavity on
base.
3
Place Defender power head
onto pole. Press down firmly
with two hands to secure.
4
Completed assembly should
have the front of power
head in the same direction
as base U-shaped legs.
5
Peel cover from attractant
cartridge. Using a coin,
unscrew cover from attrac-
tant compartment inside of
CO
2
tube.
6
Slide attractant cartridge
into compartment. Recap
and secure tightly.
7
Place propane tank onto
base into the molded cradle
supplied.
8
Making sure propane tank
is fully closed, attach pro-
pane regulator hose to
propane tank. Secure tightly
by hand. Do not use tools.
7
8